|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
RFMA5880-0.1W-02 ISSUED: 12/23/08 5.8 - 8.0 GHz Power Amplifier MMIC N/C FEATURES * * * * 5.8 - 8.0GHz Operating Frequency Range 21.0dBm Output Power @1dB Compression 27.0dB Typical Power Gain @1dB Compression -41dBc OIMD3 @Pout 11dBm/tone Excelics RFMA5880 -0.1W-02 Vd RF IN N/C N/C RF OUT Vg N/C APPLICATIONS * * Point-to-point and point-to-multipoint radio Military Radar Systems ELECTRICAL CHARACTERISTICS (TB=25 C) SYMBOL F P1dB G1dB OIMD3 Input RL Output RL ID1 VD VG Rth Tb PARAMETER/TEST CONDITIONS Operating Frequency Range Output Power @1dB Gain Compression Gain @1dB Gain Compression Output 3 Order Intermodulation Distortion @f=10MHz, Pout = 17dBm/tone Input Return Loss Output Return Loss Drain Current1 Drain Voltage Gate Voltage Thermal Resistance2 Operating Base Plate Temperature -30 5 -5 22 +80 o rd MIN 5.8 20.0 24.0 TYP MAX 8.0 UNITS GHz dBm dB 21.0 27 -41 -12 -10 300 400 7 -38 -10 dBc dB dB mA V V C/W o C 1. Recommended to bias each amplifier stage separately using a gate voltage range, starting from -2.5 to -0.3V to achieve typical current levels. 2. Rth is mounting dependent. Measured result when used with Excelics recommended evaluation board. 3,4 MAXIMUM RATINGS AT 25C SYMBOL VD VG ID PIN TCH TSTG PT Drain to Source Voltage Gate to Source Voltage Drain Current Input Power Channel Temperature Storage Temperature Total Power Dissipation CHARACTERISTIC ABSOLUTE 12V -5V Idss 20dBm 175C -65/175C 4.0W CONTINOUS 8V -2.5 V 400mA @ 3dB compression 150C -65/150C 3W 3. Operation beyond absolute or continuous ratings may result in permanent damage or reduction of MTTF respectively. 4. Bias conditions must also satisfy the following equation VDS*IDS < (TCH -TB)/RTH; where TB = Temperature of Base Plate Specifications are subject to change without notice. Excelics Semiconductor, Inc. 310 De Guigne Drive, Sunnyvale, CA 94085 Phone: 408-737-1711 Fax: 408-737-1868 Web: www.excelics.com page 1 of 2 Issued December 2008 RFMA5880-0.1W-02 ISSUED: 12/23/08 5.8 - 8.0 GHz Power Amplifier MMIC 0.433 4X.050 CHAMFER 0.216 2X DIA .090 THRU 02 Package Outline 0.204 PIN1 Indicator N/C 6x0.100 RF IN 0.709 N/C Excelics RFMA5880 -0.1W-02 Vd N/C 0.591 RF OUT 8 X .013 Vg N/C 8X 0.1000.010 0.075 8X 0.004 0.040 0.025 All dimensions in inches ORDERING INFORMATION Part Number RFMA5880-0.1W-02 Refer 02 Package Outline DISCLAIMER EXCELICS SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. EXCELICS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN. LIFE SUPPORT POLICY EXCELICS SEMICONDUCTOR PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF EXCELICS SEMICONDUCTOR, INC. AS HERE IN: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Specifications are subject to change without notice. Excelics Semiconductor, Inc. 310 De Guigne Drive, Sunnyvale, CA 94085 Phone: 408-737-1711 Fax: 408-737-1868 Web: www.excelics.com page 2 of 2 Issued December 2008 |
Price & Availability of RFMA5880-01W-02 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |